Asoni CAM742F-W Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Kamery ochrony Asoni CAM742F-W. Asoni CAM742F-W User`s manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 60
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
1080P Full-HD
H.264 CMOS Network Camera
CAM742F / CAM742F-W / CAM742F-PoE
Users Manual
Date: 3/12/2013
Firmware Version: V01.00.01.3165
Przeglądanie stron 0
1 2 3 4 5 6 ... 59 60

Podsumowanie treści

Strona 1 - User’s Manual

1080P Full-HD H.264 CMOS Network Camera CAM742F / CAM742F-W / CAM742F-PoE User’s Manual Date: 3/12/2013 Firmware Version: V01.00.

Strona 2 - Content

9 3.3 IP Assignment  Always consult your network administrator before assigning an IP address to your camera in order to avoid using a previou

Strona 3

10 2. IP Search searches all the network devices which connect to the intranet and lists on the window. Click [Search] button to search again. 3.

Strona 4 - 2. Product Specifications

11 4. Live Video 4.1 Connect with PC Start the IE browser, type the IP address of the network camera in the address field: http://<IP of came

Strona 5

12 1 2 3 4 5 When popup the following dialogue box, click [Yes].

Strona 6

13 The web page of the device shows as following.  Language : Change the display language.  Configuration : Go into the configuration page

Strona 7 - 3. Product Installation

14 Snapshot : Click this button to take snapshot of the video. The image will be saved to the indicated location that is defined with [File Locat

Strona 8 - To Network

15 4.2 Connect with Mobile Phone Start the web browser, type the IP address of the network camera in the address field: http://<IP of camera&g

Strona 9 - 3.2 Monitor Setting

16 5. Configuration Click [Configuration] button to get into the configuration page. Click [Live View] button to back to the Live-View page.

Strona 10 - 3.3 IP Assignment

17 5.1 Video / Audio 5.1.1 Video Stream This device has in total 6 independent and simultaneous streams which can be used. The Live View page p

Strona 11

18 Encode Resolution You can set up a different video resolution for Stream 2. Note: the resolution of stream 1, 3, 4, 5 and 6 are fixed and can’t

Strona 12 - 4. Live Video

1 Content Content ...

Strona 13

19 Reaction Delay Time Available only for “Enhanced CBR”, sets the maximum time in milliseconds for which the Target Bitrate Maximum is allowed. Q

Strona 14

20 5.1.2 Video (Advanced) Enable Digital PT The Digital PT feature allows you pan, tilt around the image within a selected image area. The str

Strona 15

21 Select “u-LAW” or “Off” to enable or disable the audio input. The “u-LAW” is highly recommended for 3GPP mobile surveillance (for example, on i

Strona 16

22 5.2 Camera 5.2.1 Camera Setting WB (White Balance) Enable and Disable the white balance adjustment for the image. Selections of Enable incl

Strona 17 - 5. Configuration

23 lighting, frame rate and bandwidth considerations. Exposure Time and Gain Control can be adjusted based on the specific need. Image Enhancemen

Strona 18 - 5.1 Video / Audio

24 5.2.2 Privacy Mask Sets a privacy masking on the selected area; a maximum of 3 privacy masks are allowed. To enable the mask, make a check

Strona 19

25 5.3 Network The Network Settings page allows the user to change and add more sophisticated configurations based on the network infrastructure

Strona 20

26 Netmask: Specify the mask for the subnet the network camera. Gateway: Specify the IP address for the Gateway. DNS 1: Specify the IP address for

Strona 21 - 5.1.2 Video (Advanced)

27 5.3.2 Network (Advanced) NTP Configuration Use the following NTP server address: Enter the host name or IP address of the NTP server. Note:

Strona 22 - OSD Setting

28 and user applications. Check the box to enable the service. Enable UPnP/ Enable UPnP Transversal This device supports UPnP, if the UPnP service

Strona 23 - 5.2 Camera

2 5.6 System ... 44 5.6.

Strona 24 - Default Button

29 5.3.3 DDNS The DDNS (Dynamic Domain Name Service) feature allows users to access the Network Camera without the need of remembering the IP

Strona 25 - 5.2.2 Privacy Mask

30 5.3.4 Wireless When using the wireless network for the first time, users must conduct the following setup: 1. The camera remains wired to a

Strona 26 - 5.3 Network

31 Network type Master/Slave: Select this to enable the wireless function for which it may function under a wireless connection infrastructure suc

Strona 27

32 5.4 Event Handling This function allows the user to customize the Network Camera to perform actions during a period of time, upon the occurre

Strona 28 - 5.3.2 Network (Advanced)

33 Trigger Event List Displays the current Event List saved permanently in memory. Add: In order to turn on the capability of setting an Event, cl

Strona 29 - RTSP settings

34 Send HTTP notification to: Send a text message as a parameter to predefined HTTP server set in Configuration  Event Handling  Event Server pa

Strona 30 - 5.3.3 DDNS

35 5.4.2 Motion Detection Video motion detection is used to generate an alarm whenever movement occurs in the video image. A total of 3 areas c

Strona 31 - 5.3.4 Wireless

36 Motion Detection List 3 areas can be set for which they will be identified in 3 colors each, Red, Green or Blue. Add: Once click this button, a

Strona 32 - Network Setting

37 5.4.3 Event Server Event Servers are used to receive uploaded image files and/or notification messages. To set up Event Server connections in

Strona 33 - 5.4 Event Handling

38 SMTP Server HTTP Server

Strona 34 - Trigger Event Setup

3 1. Preface This camera is a 1080P Full-HD 2 Mega-Pixel CMOS network camera which builds in web server. User views real-time video via IE browse

Strona 35

39 TCP Server After set up, click [Save] to save the settings.

Strona 36 - 5.4.2 Motion Detection

40 5.4.4 GPIO This page is used to ON/OFF the LED indicators on the front panel.  Enable “Control LED lights on the Camera”: The LED on the

Strona 37 - Motion Detection Setup

41 5.5 Storage 5.5.1 Storage Information This page allows selecting the storage to store the video or image, lately used in the Event Handler f

Strona 38 - 5.4.3 Event Server

42 Samba Files can also be stored directly into a File Server. Before configuring the IP Address, Path of the File server where the files will b

Strona 39 - HTTP Server

43 5.5.2 File List This page displays the list of files which are stored in the Micro-SD Card. User can find the needed files by configuring the

Strona 40 - TCP Server

44 5.6 System 5.6.1 System Information This page displays information about the current status of the Network Camera. Such information is usef

Strona 41 - 5.4.4 GPIO

45 5.6.2 User Management The user configuration page allows the Network Camera to have multiple users and profiles to access the Network Camera

Strona 42 - 5.5 Storage

46 After filling the information, click on [Save] button to make changes permanent to the device. There are 3 user groups: Administrator: Permissi

Strona 43

47 5.6.3 Date / Time IPCAM Time Display the date and time (24 hours clock) of the Network Camera. Set Server Time Time zone Select the GMT to

Strona 44 - 5.5.2 File List

48 Set Manually: This option allows you to manually set the time and date. Select the date from the calendar; adjust the time from the Time field.

Strona 45 - 5.6 System

4 Audio Out 1 built-in speaker Power Supply Normal & Wireless model: DC 12V, 1A PoE model (built-in PoE Splitter): Use PoE: PoE Injector (IE

Strona 46 - 5.6.2 User Management

49 5.6.4 Maintenance Maintain Server Reboot: Click on this button to restart the Network Camera. Load Default: Click on this button to set the

Strona 47 - Delete a user

50 Note:  Please do not restore previous configuration file into camera which has been upgraded with new firmware version. It may lead to malfun

Strona 48 - 5.6.3 Date / Time

51 6. Network Configuration 6.1 Intranet Only 6.1.1 Connects to PC Directly If you want to connect the camera to PC directly for the very first

Strona 49

52 6.1.2 Connects to an Exist LAN If the camera will be used in a local network (LAN) and don’t allow to access via Internet, please refer to the

Strona 50 - 5.6.4 Maintenance

53 6.2 Internet Only 6.2.1 Connects to ADSL with Fixed Public IP Address If the camera connects to Internet with an ADSL modem and the public IP

Strona 51

54 6.2.2 Connects to ADSL with Floating Public IP (PPPoE) If the camera connects to Internet with an ADSL modem and the public IP address of ADSL

Strona 52 - 6. Network Configuration

55 After enable the DDNS, assume the registered URL is “test.dyndns.org”, now the camera can be linked with following URLs: Client Link Address

Strona 53 - Intranet (LAN)

56 6.3 Intranet + Internet 6.3.1 Connects to Internet with Fixed Public IP Address If the camera will be added into a local network (LAN), and w

Strona 54 - 6.2 Internet Only

57  Set Gateway of PC and cameras with the same IP address. The Gateway is the IP address of router.  Set the IP address of a valid DNS into c

Strona 55 - Internet (WAN)

58 6.3.2 Connects to Internet with Floating Public IP If the public IP address of ADSL connection is variable, you can enable DDNS function to ge

Strona 56

5 Resolution: 160x128 Frame Rate: up to 30FPS Video Format: MJPEG Video Bitrate Adjustment CBR, VBR Image Adjustment Brightness, Contrast, Hue,

Strona 57 - 6.3 Intranet + Internet

59 7. Factory Default To recover the default settings of this device, please follow the steps: 1. Power off this device. 2. Use a needle about

Strona 58

6 3. Product Installation 3.1 Hardware Installation 3.1.1 Cable Connections  Power Jack: To connect the DC 12V power ada

Strona 59

7 PoE (Power over Ethernet) is a technology that integrates power into a standard LAN infrastructure. It enables power to be provided to the netwo

Strona 60 - 7. Factory Default

8 3.2 Monitor Setting 1. Right-Click on the desktop. Select “Properties” 2. Change color quality to “Highest (32bit)”.

Komentarze do niniejszej Instrukcji

Brak uwag